Welcome to The Cookbook

Before you learn about configuring your own routes, you should know that CakePHP comes configured with a default set of routes. CakePHP’s default routing will get you pretty far in any application. You can access an action directly via the URL by putting its name in the request. You can also pass parameters to your controller actions using the URL.

    URL pattern default routes: 
    http://example.com/controller/action/param1/param2/param3

The URL /posts/view maps to the view() action of the PostsController, and /products/viewClearance maps to the view_clearance() action of the ProductsController. If no action is specified in the URL, the index() method is assumed.

The default routing setup also allows you to pass parameters to your actions using the URL. A request for /posts/view/25 would be equivalent to calling view(25) on the PostsController, for example.

New in CakePHP 1.2 is the ability to use named parameters. You can name parameters and send their values using the URL. A request for /posts/view/title:first+post/category:general would result in a call to the view() action of the PostsController. In that action, you’d find the values of the title and category parameters inside $this->passedArgs[‘title’] and $this->passedArgs[‘category’] respectively.

Some summarizing examples for default routes might prove helpful.

URL to controller action mapping using default routes:  
    
URL: /monkeys/jump
Mapping: MonkeysController->jump();
 
URL: /products
Mapping: ProductsController->index();
 
URL: /tasks/view/45
Mapping: TasksController->view(45);
 
URL: /donations/view/recent/2001
Mapping: DonationsController->view('recent', '2001');

URL: /contents/view/chapter:models/section:associations
Mapping: ContentsController->view();
$this->passedArgs['chapter'] = 'models';
$this->passedArgs['section'] = 'associations';

Defining your own routes allows you to define how your application will respond to a given URL. Define your own routes in the /app/config/routes.php file using the Router::connect() method.

The connect() method takes up to three parameters: the URL you wish to match, the default values for custom route elements, and regular expression rules to help the router match elements in the URL.

The basic format for a route definition is:

Router::connect(
    'URL',
    array('paramName' => 'defaultValue'),
    array('paramName' => 'matchingRegex')
)

1. Router::connect(
2. 'URL',
3. array('paramName' => 'defaultValue'),
4. array('paramName' => 'matchingRegex')
5. )

The first parameter is used to tell the router what sort of URL you’re trying to control. The URL is a normal slash delimited string, but can also contain a wildcard (*) or custom route elements (URL elements prefixed with a colon). Using a wildcard tells the router what sorts of URLs you want to match, and specifying route elements allows you to gather parameters for your controller actions.

Once you’ve specified a URL, you use the last two parameters of connect() to tell CakePHP what to do with a request once it has been matched. The second parameter is an associative array. The keys of the array should be named after the route elements in the URL, or the default elements: :controller, :action, and :plugin. The values in the array are the default values for those keys. Let’s look at some basic examples before we start using the third parameter of connect().

Router::connect(
    '/pages/*',
    array('controller' => 'pages', 'action' => 'display')
);

1. Router::connect(
2. '/pages/*',
3. array('controller' => 'pages', 'action' => 'display')
4. );

This route is found in the routes.php file distributed with CakePHP (line 40). This route matches any URL starting with /pages/ and hands it to the display() method of the PagesController(); The request /pages/products would be mapped to PagesController->display(‘products’), for example.

Router::connect(
    '/government',
    array('controller' => 'products', 'action' => 'display', 5)
);

1. Router::connect(
2. '/government',
3. array('controller' => 'products', 'action' => 'display', 5)
4. );

This second example shows how you can use the second parameter of connect() to define default parameters. If you built a site that features products for different categories of customers, you might consider creating a route. This allows you link to /government rather than /products/display/5.

For additional flexibility, you can specify custom route elements. Doing so gives you the power to define places in the URL where parameters for controller actions should lie. When a request is made, the values for these custom route elements are found in $this->params of the controller. This is different than named parameters are handled, so note the difference: named parameters (/controller/action/name:value) are found in $this->passedArgs, whereas custom route element data is found in $this->params. When you define a custom route element, you also need to specify a regular expression - this tells CakePHP how to know if the URL is correctly formed or not.

Router::connect(
    '/:controller/:id',
    array('action' => 'view'),
    array('id' => '[0-9]+')
);

1. Router::connect(
2. '/:controller/:id',
3. array('action' => 'view'),
4. array('id' => '[0-9]+')
5. );

This simple example illustrates how to create a quick way to view models from any controller by crafting a URL that looks like /controllername/id. The URL provided to connect() specifies two route elements: :controller and :id. The :controller element is a CakePHP default route element, so the router knows how to match and identify controller names in URLs. The :id element is a custom route element, and must be further clarified by specifying a matching regular expression in the third parameter of connect(). This tells CakePHP how to recognize the ID in the URL as opposed to something else, such as an action name.

Once this route has been defined, requesting /apples/5 is the same as requesting /apples/view/5. Both would call the view() method of the ApplesController. Inside the view() method, you would need to access the passed ID at $this->params[‘id’].

One more example, and you’ll be a routing pro.

Router::connect(
    '/:controller/:year/:month/:day',
    array('action' => 'index', 'day' => null),
    array(
        'year' => '[12][0-9]{3}',
        'month' => '(0[1-9]|1[012])',
        'day' => '(0[1-9]|[12][0-9]|3[01])'
    )
);

1. Router::connect(
2. '/:controller/:year/:month/:day',
3. array('action' => 'index', 'day' => null),
4. array(
5. 'year' => '[12][0-9]{3}',
6. 'month' => '(0[1-9]|1[012])',
7. 'day' => '(0[1-9]|[12][0-9]|3[01])'
8. )
9. );

This is rather involved, but shows how powerful routes can really become. The URL supplied has four route elements. The first is familiar to us: it’s a default route element that tells CakePHP to expect a controller name.

Next, we specify some default values. Regardless of the controller, we want the index() action to be called. We set the day parameter (the fourth element in the URL) to null to flag it as being optional.

Finally, we specify some regular expressions that will match years, months and days in numerical form.

Once defined, this route will match /articles/2007/02/01, /posts/2004/11/16, and /products/2001/05 (remember that the day parameter is optional?), handing the requests to the index() actions of their respective controllers, with the custom date parameters in $this->params.

Assuming your action was defined like this and you want to access the arguments using $articleID instead of $this->params['id'], just add an extra array in the 3rd parameter of Router::connect().

// some_controller.php
function view($articleID = null, $slug = null) {
    // some code here...
}

// routes.php
Router::connect(
    // E.g. /blog/3-CakePHP_Rocks
    '/blog/:id-:slug',
    array('controller' => 'blog', 'action' => 'view'),
    array(
        // order matters since this will simply map ":id" to $articleID in your action
        'pass' => array('id', 'slug'),
        'id' => '[0-9]+'
    )
)

1. // some_controller.php
2. function view($articleID = null, $slug = null) {
3. // some code here...
4. }
5. // routes.php
6. Router::connect(
7. // E.g. /blog/3-CakePHP_Rocks
8. '/blog/:id-:slug',
9. array('controller' => 'blog', 'action' => 'view'),
10. array(
11. // order matters since this will simply map ":id" to $articleID in your action
12. 'pass' => array('id', 'slug'),
13. 'id' => '[0-9]+'
14. )
15. )

And now, thanks to the reverse routing capabilities, you can pass in the url array like below and Cake will know how to form the URL as defined in the routes.

// view.ctp
// this will return a link to /blog/3-CakePHP_Rocks
<?= $html->link('CakePHP Rocks', array(
    'controller' => 'blog',
    'action' => 'view',
    'id' => 3,
    'slug' => Inflector::slug('CakePHP Rocks')
)) ?>

1. // view.ctp
2. // this will return a link to /blog/3-CakePHP_Rocks
3. <?= $html->link('CakePHP Rocks', array(
4. 'controller' => 'blog',
5. 'action' => 'view',
6. 'id' => 3,
7. 'slug' => Inflector::slug('CakePHP Rocks')
8. )) ?>

Many applications require an administration section where priveledged users can make changes. This is often done through a special URL such as /admin/users/edit/5. In CakePHP, admin routing can be enabled from within the core configuration file by setting the admin path for Routing.admin.

Configure::write('Routing.admin', 'admin');

1. Configure::write('Routing.admin', 'admin');

In your controller, any action with an admin_ prefix will be called. Using our users example, the method name of our UsersController would be admin_edit.

You can use the Router to use custom prefixes for uses beyond admin routing, too.

Router::connect('/profiles/:controller/:action', array('prefix' => 'profiles', 'profiles' => true)); 

1. Router::connect('/profiles/:controller/:action', array('prefix' => 'profiles', 'profiles' => true));

Any calls to the profiles section would look for the profiles_ prefix on the method calls. Our users example would have a URL structure that looks like /profiles/users/edit/5 would call the profiles_edit method within the UsersController. Also important to remember, using the HTML helper to build your links will help maintain the prefix calls. Here's an example link being built using the HTML helper:

echo $html->link('Edit your profile', array('controller' => 'users', 'action' => 'profiles_edit', 'profiles' => true)); 

1. echo $html->link('Edit your profile', array('controller' => 'users', 'action' => 'profiles_edit', 'profiles' => true));

You can set up multiple prefixed routes using this approach to create a flexible URL structure for your application.